1. WeatherSpark.com
  2. United States
  3. Georgia

Climate and Average Weather Year Round in Lumber City Georgia, United States

In Lumber City, the summers are long, hot, and oppressive; the winters are short and cold; and it is wet and partly cloudy year round. Over the course of the year, the temperature typically varies from 41°F to 93°F and is rarely below 28°F or above 99°F.

Based on the tourism score, the best times of year to visit Lumber City for warm-weather activities are from early April to late May and from late September to late October.

Climate in Lumber City

coolwarmhotwarmcoolJanFebMarAprMayJunJulAugSepOctNovDecNowNow66%66%47%47%clearovercastprecipitation: 4.2 inprecipitation: 4.2 in2.3 in2.3 inmuggy: 98%muggy: 98%2%2%drydrytourism score: 6.4tourism score: 6.42.62.6
Lumber City weather by month. Click on each chart for more information.

The hot season lasts for 4.0 months, from May 19 to September 18, with an average daily high temperature above 87°F. The hottest month of the year in Lumber City is July, with an average high of 93°F and low of 74°F.

The cool season lasts for 3.0 months, from November 30 to February 28, with an average daily high temperature below 68°F. The coldest month of the year in Lumber City is January, with an average low of 42°F and high of 62°F.

Average High and Low Temperature in Lumber City

Average High and Low Temperature in Lumber CityhotcoolcoolJanFebMarAprMayJunJulAugSepOctNovDec0°F0°F10°F10°F20°F20°F30°F30°F40°F40°F50°F50°F60°F60°F70°F70°F80°F80°F90°F90°F100°F100°F110°F110°FJan 1762°FJan 1762°FJul 2093°FJul 2093°F41°F41°F74°F74°FMay 1987°FMay 1987°FSep 1887°FSep 1887°FNov 3068°FNov 3068°FFeb 2868°FFeb 2868°F65°F65°F68°F68°F47°F47°F46°F46°FNowNow
The daily average high (red line) and low (blue line) temperature, with 25th to 75th and 10th to 90th percentile bands. The thin dotted lines are the corresponding average perceived temperatures.
AverageJanFebMarAprMayJunJulAugSepOctNovDec
High 62°F65°F72°F79°F86°F91°F93°F92°F87°F80°F72°F64°F
Temp. 50°F53°F60°F67°F75°F81°F83°F82°F77°F69°F60°F53°F
Low 42°F44°F50°F57°F64°F71°F74°F73°F68°F58°F49°F44°F

The figure below shows you a compact characterization of the entire year of hourly average temperatures. The horizontal axis is the day of the year, the vertical axis is the hour of the day, and the color is the average temperature for that hour and day.

Average Hourly Temperature in Lumber City

Average Hourly Temperature in Lumber CityJanFebMarAprMayJunJulAugSepOctNovDec12 AM12 AM2 AM2 AM4 AM4 AM6 AM6 AM8 AM8 AM10 AM10 AM12 PM12 PM2 PM2 PM4 PM4 PM6 PM6 PM8 PM8 PM10 PM10 PM12 AM12 AMNowNowcoldcoldcoldcoldcoolcoolcomfortablewarmwarmhotvery cold
frigid 15°F freezing 32°F very cold 45°F cold 55°F cool 65°F comfortable 75°F warm 85°F hot 95°F sweltering
The average hourly temperature, color coded into bands. The shaded overlays indicate night and civil twilight.

Udhampur, India (7,737 miles away); Meipu, China (8,185 miles); and Roxby Downs, Australia (10,121 miles) are the far-away foreign places with temperatures most similar to Lumber City (view comparison).

Map
Marker
© OpenStreetMap contributors

Compare Lumber City to another city:

Map

In Lumber City, the average percentage of the sky covered by clouds experiences mild seasonal variation over the course of the year.

The clearer part of the year in Lumber City begins around September 11 and lasts for 2.8 months, ending around December 6.

The clearest month of the year in Lumber City is October, during which on average the sky is clear, mostly clear, or partly cloudy 65% of the time.

The cloudier part of the year begins around December 6 and lasts for 9.2 months, ending around September 11.

The cloudiest month of the year in Lumber City is July, during which on average the sky is overcast or mostly cloudy 51% of the time.

Cloud Cover Categories in Lumber City

Cloud Cover Categories in Lumber CityclearercloudierJanFebMarAprMayJunJulAugSepOctNovDec0%100%10%90%20%80%30%70%40%60%50%50%60%40%70%30%80%20%90%10%100%0%Oct 2666%Oct 2666%Jul 1247%Jul 1247%Sep 1157%Sep 1157%Dec 657%Dec 657%NowNowclearmostly clearpartly cloudymostly cloudyovercast
0% clear 20% mostly clear 40% partly cloudy 60% mostly cloudy 80% overcast 100%
The percentage of time spent in each cloud cover band, categorized by the percentage of the sky covered by clouds.
FractionJanFebMarAprMayJunJulAugSepOctNovDec
Cloudier 47%47%43%38%41%47%51%47%41%35%39%45%
Clearer 53%53%57%62%59%53%49%53%59%65%61%55%

A wet day is one with at least 0.04 inches of liquid or liquid-equivalent precipitation. The chance of wet days in Lumber City varies significantly throughout the year.

The wetter season lasts 3.3 months, from May 27 to September 6, with a greater than 35% chance of a given day being a wet day. The month with the most wet days in Lumber City is July, with an average of 15.8 days with at least 0.04 inches of precipitation.

The drier season lasts 8.6 months, from September 6 to May 27. The month with the fewest wet days in Lumber City is October, with an average of 6.0 days with at least 0.04 inches of precipitation.

Among wet days, we distinguish between those that experience rain alone, snow alone, or a mixture of the two. The month with the most days of rain alone in Lumber City is July, with an average of 15.8 days. Based on this categorization, the most common form of precipitation throughout the year is rain alone, with a peak probability of 53% on August 3.

Daily Chance of Precipitation in Lumber City

Daily Chance of Precipitation in Lumber CitywetdrydryJanFebMarAprMayJunJulAugSepOctNovDec0%0%10%10%20%20%30%30%40%40%50%50%60%60%70%70%80%80%90%90%100%100%Aug 353%Aug 353%Oct 2917%Oct 2917%May 2735%May 2735%Sep 635%Sep 635%NowNowrain
The percentage of days in which various types of precipitation are observed, excluding trace quantities: rain alone, snow alone, and mixed (both rain and snow fell in the same day).
Days ofJanFebMarAprMayJunJulAugSepOctNovDec
Rain 8.0d8.2d8.6d7.7d8.8d13.7d15.8d14.7d9.2d6.0d6.0d7.8d
Mixed 0.2d0.0d0.0d0.0d0.0d0.0d0.0d0.0d0.0d0.0d0.0d0.1d
Any 8.2d8.2d8.6d7.7d8.8d13.7d15.8d14.7d9.2d6.0d6.0d7.8d

To show variation within the months and not just the monthly totals, we show the rainfall accumulated over a sliding 31-day period centered around each day of the year. Lumber City experiences some seasonal variation in monthly rainfall.

Rain falls throughout the year in Lumber City. The month with the most rain in Lumber City is February, with an average rainfall of 4.2 inches.

The month with the least rain in Lumber City is October, with an average rainfall of 2.4 inches.

Average Monthly Rainfall in Lumber City

The average rainfall (solid line) accumulated over the course of a sliding 31-day period centered on the day in question, with 25th to 75th and 10th to 90th percentile bands. The thin dotted line is the corresponding average snowfall.
JanFebMarAprMayJunJulAugSepOctNovDec
Rainfall 3.7″4.2″3.9″2.9″2.6″3.8″3.8″4.1″3.1″2.4″2.5″3.3″

The length of the day in Lumber City varies significantly over the course of the year. In 2024, the shortest day is December 21, with 10 hours, 4 minutes of daylight; the longest day is June 20, with 14 hours, 14 minutes of daylight.

Hours of Daylight and Twilight in Lumber City

Hours of Daylight and Twilight in Lumber CityJanFebMarAprMayJunJulAugSepOctNovDec0 hr24 hr4 hr20 hr8 hr16 hr12 hr12 hr16 hr8 hr20 hr4 hr24 hr0 hr12 hr, 7 minMar 1912 hr, 7 minMar 1914 hr, 14 minJun 2014 hr, 14 minJun 2012 hr, 9 minSep 2212 hr, 9 minSep 2210 hr, 4 minDec 2110 hr, 4 minDec 21nightnightdayNowNow
The number of hours during which the Sun is visible (black line). From bottom (most yellow) to top (most gray), the color bands indicate: full daylight, twilight (civil, nautical, and astronomical), and full night.
Hours ofJanFebMarAprMayJunJulAugSepOctNovDec
Daylight 10.3h11.1h12.0h13.0h13.8h14.2h14.0h13.3h12.3h11.4h10.5h10.1h

The earliest sunrise is at 6:24 AM on June 11, and the latest sunrise is 1 hour, 24 minutes later at 7:48 AM on November 2. The earliest sunset is at 5:26 PM on December 3, and the latest sunset is 3 hours, 15 minutes later at 8:40 PM on June 29.

Daylight saving time (DST) is observed in Lumber City during 2024, starting in the spring on March 10, lasting 7.8 months, and ending in the fall on November 3.

Sunrise & Sunset with Twilight and Daylight Saving Time in Lumber City

Sunrise & Sunset with Twilight and Daylight Saving Time in Lumber CityJanFebMarAprMayJunJulAugSepOctNovDec2 AM4 AM6 AM8 AM10 AM12 PM2 PM4 PM6 PM8 PM10 PM12 AMJun 116:24 AMJun 116:24 AM8:40 PMJun 298:40 PMJun 29Dec 35:26 PMDec 35:26 PM7:48 AMNov 27:48 AMNov 2Mar 10DSTMar 10DSTDSTNov 3DSTNov 3daynightnightnightSolarMidnightSolarMidnightSolarNoonSunriseSunsetNowNow
The solar day over the course of the year 2024. From bottom to top, the black lines are the previous solar midnight, sunrise, solar noon, sunset, and the next solar midnight. The day, twilights (civil, nautical, and astronomical), and night are indicated by the color bands from yellow to gray. The transitions to and from daylight saving time are indicated by the 'DST' labels.

The figure below presents a compact representation of the sun's elevation (the angle of the sun above the horizon) and azimuth (its compass bearing) for every hour of every day in the reporting period. The horizontal axis is the day of the year and the vertical axis is the hour of the day. For a given day and hour of that day, the background color indicates the azimuth of the sun at that moment. The black isolines are contours of constant solar elevation.

Solar Elevation and Azimuth in Lumber City

Solar Elevation and Azimuth in Lumber CityJanFebMarAprMayJunJulAugSepOctNovDec12 AM12 AM2 AM2 AM4 AM4 AM6 AM6 AM8 AM8 AM10 AM10 AM12 PM12 PM2 PM2 PM4 PM4 PM6 PM6 PM8 PM8 PM10 PM10 PM12 AM12 AM000101010102020203030304040405050606070800001010102020202030303040404050506060707035NowNow
northeastsouthwest
Solar elevation and azimuth over the course of the year 2024. The black lines are lines of constant solar elevation (the angle of the sun above the horizon, in degrees). The background color fills indicate the azimuth (the compass bearing) of the sun. The lightly tinted areas at the boundaries of the cardinal compass points indicate the implied intermediate directions (northeast, southeast, southwest, and northwest).

The figure below presents a compact representation of key lunar data for 2024. The horizontal axis is the day, the vertical axis is the hour of the day, and the colored areas indicate when the moon is above the horizon. The vertical gray bars (new Moons) and blue bars (full Moons) indicate key Moon phases.

Moon Rise, Set & Phases in Lumber City

The time in which the moon is above the horizon (light blue area), with new moons (dark gray lines) and full moons (blue lines) indicated. The shaded overlays indicate night and civil twilight.

We base the humidity comfort level on the dew point, as it determines whether perspiration will evaporate from the skin, thereby cooling the body. Lower dew points feel drier and higher dew points feel more humid. Unlike temperature, which typically varies significantly between night and day, dew point tends to change more slowly, so while the temperature may drop at night, a muggy day is typically followed by a muggy night.

Lumber City experiences extreme seasonal variation in the perceived humidity.

The muggier period of the year lasts for 5.6 months, from May 4 to October 23, during which time the comfort level is muggy, oppressive, or miserable at least 26% of the time. The month with the most muggy days in Lumber City is July, with 30.1 days that are muggy or worse.

The month with the fewest muggy days in Lumber City is February, with 1.0 days that are muggy or worse.

Humidity Comfort Levels in Lumber City

Humidity Comfort Levels in Lumber CitymuggyJanFebMarAprMayJunJulAugSepOctNovDec0%0%10%10%20%20%30%30%40%40%50%50%60%60%70%70%80%80%90%90%100%100%Jan 302%Jan 302%98%Aug 598%Aug 5May 426%May 426%Oct 2326%Oct 2326%NowNowmiserablemiserableoppressiveoppressivedrydryhumidhumidcomfortablecomfortable
dry 55°F comfortable 60°F humid 65°F muggy 70°F oppressive 75°F miserable
The percentage of time spent at various humidity comfort levels, categorized by dew point.
JanFebMarAprMayJunJulAugSepOctNovDec
Muggy days 1.1d1.0d2.4d4.9d13.4d25.3d30.1d29.9d22.9d10.5d3.9d2.1d

This section discusses the wide-area hourly average wind vector (speed and direction) at 10 meters above the ground. The wind experienced at any given location is highly dependent on local topography and other factors, and instantaneous wind speed and direction vary more widely than hourly averages.

The average hourly wind speed in Lumber City experiences mild seasonal variation over the course of the year.

The windier part of the year lasts for 7.1 months, from October 8 to May 11, with average wind speeds of more than 7.3 miles per hour. The windiest month of the year in Lumber City is March, with an average hourly wind speed of 8.5 miles per hour.

The calmer time of year lasts for 4.9 months, from May 11 to October 8. The calmest month of the year in Lumber City is August, with an average hourly wind speed of 6.0 miles per hour.

Average Wind Speed in Lumber City

Average Wind Speed in Lumber CitywindywindyJanFebMarAprMayJunJulAugSepOctNovDec0 mph0 mph2 mph2 mph4 mph4 mph6 mph6 mph8 mph8 mph10 mph10 mph12 mph12 mph14 mph14 mphMar 78.7 mphMar 78.7 mphAug 165.9 mphAug 165.9 mphOct 87.3 mphOct 87.3 mphMay 117.3 mphMay 117.3 mphNowNow
The average of mean hourly wind speeds (dark gray line), with 25th to 75th and 10th to 90th percentile bands.
JanFebMarAprMayJunJulAugSepOctNovDec
Wind Speed (mph) 8.18.48.58.07.26.56.16.06.87.37.67.7

The predominant average hourly wind direction in Lumber City varies throughout the year.

The wind is most often from the east for 3.8 months, from August 13 to December 7, with a peak percentage of 46% on September 6. The wind is most often from the west for 8.2 months, from December 7 to August 13, with a peak percentage of 33% on January 1.

Wind Direction in Lumber City

Wind Direction in Lumber CityWEWJanFebMarAprMayJunJulAugSepOctNovDec0%100%20%80%40%60%60%40%80%20%100%0%NowNowwestsoutheastnorth
northeastsouthwest
The percentage of hours in which the mean wind direction is from each of the four cardinal wind directions, excluding hours in which the mean wind speed is less than 1.0 mph. The lightly tinted areas at the boundaries are the percentage of hours spent in the implied intermediate directions (northeast, southeast, southwest, and northwest).

To characterize how pleasant the weather is in Lumber City throughout the year, we compute two travel scores.

The tourism score favors clear, rainless days with perceived temperatures between 65°F and 80°F. Based on this score, the best times of year to visit Lumber City for general outdoor tourist activities are from early April to late May and from late September to late October, with a peak score in the last week of April.

Tourism Score in Lumber City

Tourism Score in Lumber Citybest timeJanFebMarAprMayJunJulAugSepOctNovDec002244668810106.46.42.62.66.36.34.04.0NowNow cloudscloudsprecipitationprecipitationtourism score
The tourism score (filled area), and its constituents: the temperature score (red line), the cloud cover score (blue line), and the precipitation score (green line).

The beach/pool score favors clear, rainless days with perceived temperatures between 75°F and 90°F. Based on this score, the best times of year to visit Lumber City for hot-weather activities are from early May to early July and from mid August to early October, with a peak score in the first week of September.

Beach/Pool Score in Lumber City

Beach/Pool Score in Lumber Citybest timebest timeJanFebMarAprMayJunJulAugSepOctNovDec002244668810105.85.80.60.65.85.84.94.9NowNowtemperaturetemperature cloudscloudsprecipitationprecipitationbeach/pool score
The beach/pool score (filled area), and its constituents: the temperature score (red line), the cloud cover score (blue line), and the precipitation score (green line).

Methodology

For each hour between 8:00 AM and 9:00 PM of each day in the analysis period (1980 to 2016), independent scores are computed for perceived temperature, cloud cover, and total precipitation. Those scores are combined into a single hourly composite score, which is then aggregated into days, averaged over all the years in the analysis period, and smoothed.

Our cloud cover score is 10 for fully clear skies, falling linearly to 9 for mostly clear skies, and to 1 for fully overcast skies.

Our precipitation score, which is based on the three-hour precipitation centered on the hour in question, is 10 for no precipitation, falling linearly to 9 for trace precipitation, and to 0 for 0.04 inches of precipitation or more.

Our tourism temperature score is 0 for perceived temperatures below 50°F, rising linearly to 9 for 65°F, to 10 for 75°F, falling linearly to 9 for 80°F, and to 1 for 90°F or hotter.

Our beach/pool temperature score is 0 for perceived temperatures below 65°F, rising linearly to 9 for 75°F, to 10 for 82°F, falling linearly to 9 for 90°F, and to 1 for 100°F or hotter.

Definitions of the growing season vary throughout the world, but for the purposes of this report, we define it as the longest continuous period of non-freezing temperatures (≥ 32°F) in the year (the calendar year in the Northern Hemisphere, or from July 1 until June 30 in the Southern Hemisphere).

The growing season in Lumber City typically lasts for 9.3 months (283 days), from around February 20 to around November 30, rarely starting before January 30 or after March 17, and rarely ending before November 4 or after December 30.

Time Spent in Various Temperature Bands and the Growing Season in Lumber City

Time Spent in Various Temperature Bands and the Growing Season in Lumber Citygrowing seasonJanFebMarAprMayJunJulAugSepOctNovDec0%100%10%90%20%80%30%70%40%60%50%50%60%40%70%30%80%20%90%10%100%0%50%Feb 2050%Feb 2050%Nov 3050%Nov 3090%Mar 1790%Mar 1790%Nov 490%Nov 410%Jan 3010%Jan 3010%Dec 3010%Dec 30Jul 12100%Jul 12100%NowNowvery coldcoldcoolcomfortablewarmhotsweltering
frigid 15°F freezing 32°F very cold 45°F cold 55°F cool 65°F comfortable 75°F warm 85°F hot 95°F sweltering
The percentage of time spent in various temperature bands. The black line is the percentage chance that a given day is within the growing season.

Growing degree days are a measure of yearly heat accumulation used to predict plant and animal development, and defined as the integral of warmth above a base temperature, discarding any excess above a maximum temperature. In this report, we use a base of 50°F and a cap of 86°F.

Based on growing degree days alone, the first spring blooms in Lumber City should appear around January 19, only rarely appearing before January 12 or after February 1.

Growing Degree Days in Lumber City

Growing Degree Days in Lumber CityJanFebMarAprMayJunJulAugSepOctNovDec0°F0°F1,000°F1,000°F2,000°F2,000°F3,000°F3,000°F4,000°F4,000°F5,000°F5,000°F6,000°F6,000°FJan 1990°FJan 1990°FApr 14900°FApr 14900°FMay 251,800°FMay 251,800°FDec 316,635°FDec 316,635°FNowNow
The average growing degree days accumulated over the course of the year, with 25th to 75th and 10th to 90th percentile bands.

This section discusses the total daily incident shortwave solar energy reaching the surface of the ground over a wide area, taking full account of seasonal variations in the length of the day, the elevation of the Sun above the horizon, and absorption by clouds and other atmospheric constituents. Shortwave radiation includes visible light and ultraviolet radiation.

The average daily incident shortwave solar energy experiences significant seasonal variation over the course of the year.

The brighter period of the year lasts for 3.3 months, from April 6 to July 17, with an average daily incident shortwave energy per square meter above 6.0 kWh. The brightest month of the year in Lumber City is May, with an average of 6.7 kWh.

The darker period of the year lasts for 2.8 months, from November 12 to February 5, with an average daily incident shortwave energy per square meter below 3.7 kWh. The darkest month of the year in Lumber City is December, with an average of 3.0 kWh.

Average Daily Incident Shortwave Solar Energy in Lumber City

Average Daily Incident Shortwave Solar Energy in Lumber CitybrightdarkdarkJanFebMarAprMayJunJulAugSepOctNovDec0 kWh0 kWh1 kWh1 kWh2 kWh2 kWh3 kWh3 kWh4 kWh4 kWh5 kWh5 kWh6 kWh6 kWh7 kWh7 kWh8 kWh8 kWh9 kWh9 kWhMay 166.8 kWhMay 166.8 kWhDec 202.9 kWhDec 202.9 kWhApr 66.0 kWhApr 66.0 kWhJul 176.0 kWhJul 176.0 kWhFeb 53.7 kWhFeb 53.7 kWhNowNow
The average daily shortwave solar energy reaching the ground per square meter (orange line), with 25th to 75th and 10th to 90th percentile bands.
JanFebMarAprMayJunJulAugSepOctNovDec
Solar Energy (kWh) 3.24.05.26.36.76.46.05.75.34.63.63.0

For the purposes of this report, the geographical coordinates of Lumber City are 31.929 deg latitude, -82.680 deg longitude, and 138 ft elevation.

The topography within 2 miles of Lumber City contains only modest variations in elevation, with a maximum elevation change of 131 feet and an average elevation above sea level of 124 feet. Within 10 miles also contains only modest variations in elevation (217 feet). Within 50 miles also contains only modest variations in elevation (427 feet).

The area within 2 miles of Lumber City is covered by trees (53%), herbaceous vegetation (20%), cropland (14%), and artificial surfaces (11%), within 10 miles by trees (57%) and cropland (21%), and within 50 miles by trees (54%) and cropland (30%).

This report illustrates the typical weather in Lumber City, based on a statistical analysis of historical hourly weather reports and model reconstructions from January 1, 1980 to December 31, 2016.

Temperature and Dew Point

There are 4 weather stations near enough to contribute to our estimation of the temperature and dew point in Lumber City.

For each station, the records are corrected for the elevation difference between that station and Lumber City according to the International Standard Atmosphere , and by the relative change present in the MERRA-2 satellite-era reanalysis between the two locations.

The estimated value at Lumber City is computed as the weighted average of the individual contributions from each station, with weights proportional to the inverse of the distance between Lumber City and a given station.

The stations contributing to this reconstruction are:

To get a sense of how much these sources agree with each other, you can view a comparison of Lumber City and the stations that contribute to our estimates of its temperature history and climate. Please note that each source's contribution is adjusted for elevation and the relative change present in the MERRA-2 data.

Other Data

All data relating to the Sun's position (e.g., sunrise and sunset) are computed using astronomical formulas from the book, Astronomical Algorithms 2nd Edition , by Jean Meeus.

All other weather data, including cloud cover, precipitation, wind speed and direction, and solar flux, come from NASA's MERRA-2 Modern-Era Retrospective Analysis . This reanalysis combines a variety of wide-area measurements in a state-of-the-art global meteorological model to reconstruct the hourly history of weather throughout the world on a 50-kilometer grid.

Land Use data comes from the Global Land Cover SHARE database , published by the Food and Agriculture Organization of the United Nations.

Elevation data comes from the Shuttle Radar Topography Mission (SRTM) , published by NASA's Jet Propulsion Laboratory.

Names, locations, and time zones of places and some airports come from the GeoNames Geographical Database .

Time zones for airports and weather stations are provided by AskGeo.com .

Maps are © OpenStreetMap contributors.

Disclaimer

The information on this site is provided as is, without any assurances as to its accuracy or suitability for any purpose. Weather data is prone to errors, outages, and other defects. We assume no responsibility for any decisions made on the basis of the content presented on this site.

We draw particular cautious attention to our reliance on the MERRA-2 model-based reconstructions for a number of important data series. While having the tremendous advantages of temporal and spatial completeness, these reconstructions: (1) are based on computer models that may have model-based errors, (2) are coarsely sampled on a 50 km grid and are therefore unable to reconstruct the local variations of many microclimates, and (3) have particular difficulty with the weather in some coastal areas, especially small islands.

We further caution that our travel scores are only as good as the data that underpin them, that weather conditions at any given location and time are unpredictable and variable, and that the definition of the scores reflects a particular set of preferences that may not agree with those of any particular reader.

Please review our full terms contained on our Terms of Service page.