February Weather in Melbourne Florida, United States
Daily high temperatures increase by 3°F, from 72°F to 74°F, rarely falling below 62°F or exceeding 82°F.
Daily low temperatures increase by 3°F, from 54°F to 57°F, rarely falling below 41°F or exceeding 68°F.
For reference, on July 23, the hottest day of the year, temperatures in Melbourne typically range from 76°F to 89°F, while on January 15, the coldest day of the year, they range from 54°F to 71°F.
Average High and Low Temperature in February in Melbourne
The figure below shows you a compact characterization of the hourly average temperatures for the quarter of the year centered on February. The horizontal axis is the day, the vertical axis is the hour of the day, and the color is the average temperature for that hour and day.
Average Hourly Temperature in February in Melbourne
frigid 15°F freezing 32°F very cold 45°F cold 55°F cool 65°F comfortable 75°F warm 85°F hot 95°F sweltering
The month of February in Melbourne experiences essentially constant cloud cover, with the percentage of time that the sky is overcast or mostly cloudy remaining about 39% throughout the month. The lowest chance of overcast or mostly cloudy conditions is 37% on February 24.
The clearest day of the month is February 24, with clear, mostly clear, or partly cloudy conditions 63% of the time.
For reference, on July 7, the cloudiest day of the year, the chance of overcast or mostly cloudy conditions is 69%, while on May 1, the clearest day of the year, the chance of clear, mostly clear, or partly cloudy skies is 64%.
Cloud Cover Categories in February in Melbourne
0% clear 20% mostly clear 40% partly cloudy 60% mostly cloudy 80% overcast 100%
A wet day is one with at least 0.04 inches of liquid or liquid-equivalent precipitation. In Melbourne, the chance of a wet day over the course of February is essentially constant, remaining around 22% throughout.
For reference, the year's highest daily chance of a wet day is 59% on August 24, and its lowest chance is 18% on December 28.
Probability of Precipitation in February in Melbourne
To show variation within the month and not just the monthly total, we show the rainfall accumulated over a sliding 31-day period centered around each day.
The average sliding 31-day rainfall during February in Melbourne is essentially constant, remaining about 2.4 inches throughout, and rarely exceeding 4.9 inches or falling below 0.4 inches.
Average Monthly Rainfall in February in Melbourne
Over the course of February in Melbourne, the length of the day is increasing. From the start to the end of the month, the length of the day increases by 41 minutes, implying an average daily increase of 1 minute, 31 seconds, and weekly increase of 10 minutes, 38 seconds.
The shortest day of the month is February 1, with 10 hours, 53 minutes of daylight and the longest day is February 28, with 11 hours, 35 minutes of daylight.
Hours of Daylight and Twilight in February in Melbourne
The latest sunrise of the month in Melbourne is 7:09 AM on February 1 and the earliest sunrise is 22 minutes earlier at 6:47 AM on February 28.
The earliest sunset is 6:02 PM on February 1 and the latest sunset is 19 minutes later at 6:22 PM on February 28.
Daylight saving time is observed in Melbourne during 2021, but it neither starts nor ends during February, so the entire month is in standard time.
For reference, on June 21, the longest day of the year, the Sun rises at 6:26 AM and sets 13 hours, 56 minutes later, at 8:22 PM, while on December 21, the shortest day of the year, it rises at 7:09 AM and sets 10 hours, 22 minutes later, at 5:31 PM.
Sunrise & Sunset with Twilight and Daylight Saving Time in February in Melbourne
The figure below presents a compact representation of key lunar data for February 2021. The horizontal axis is the day, the vertical axis is the hour of the day, and the colored areas indicate when the moon is above the horizon. The vertical gray bars (new Moons) and blue bars (full Moons) indicate key Moon phases. The label associated with each bar indicates the date and time that the phase is obtained, and the companion time labels indicate the rise and set times of the Moon for the nearest time interval in which the moon is above the horizon.
Moon Rise, Set & Phases in February in Melbourne
We base the humidity comfort level on the dew point, as it determines whether perspiration will evaporate from the skin, thereby cooling the body. Lower dew points feel drier and higher dew points feel more humid. Unlike temperature, which typically varies significantly between night and day, dew point tends to change more slowly, so while the temperature may drop at night, a muggy day is typically followed by a muggy night.
The chance that a given day will be muggy in Melbourne is gradually increasing during February, rising from 15% to 19% over the course of the month.
For reference, on July 27, the muggiest day of the year, there are muggy conditions 100% of the time, while on January 30, the least muggy day of the year, there are muggy conditions 14% of the time.
Humidity Comfort Levels in February in Melbourne
dry 55°F comfortable 60°F humid 65°F muggy 70°F oppressive 75°F miserable
This section discusses the wide-area hourly average wind vector (speed and direction) at 10 meters above the ground. The wind experienced at any given location is highly dependent on local topography and other factors, and instantaneous wind speed and direction vary more widely than hourly averages.
The average hourly wind speed in Melbourne is essentially constant during February, remaining within 0.2 miles per hour of 11.0 miles per hour throughout.
For reference, on March 14, the windiest day of the year, the daily average wind speed is 11.3 miles per hour, while on August 4, the calmest day of the year, the daily average wind speed is 6.8 miles per hour.
Average Wind Speed in February in Melbourne
The wind direction in Melbourne during February is predominantly out of the north from February 1 to February 21 and the east from February 21 to February 28.
Wind Direction in February in Melbourne
Melbourne is located near a large body of water (e.g., ocean, sea, or large lake). This section reports on the wide-area average surface temperature of that water.
The average surface water temperature in Melbourne is essentially constant during February, remaining around 71°F throughout.
The lowest average surface water temperature during February is 71°F on February 7.
Average Water Temperature in February in Melbourne
Definitions of the growing season vary throughout the world, but for the purposes of this report, we define it as the longest continuous period of non-freezing temperatures (≥ 32°F) in the year (the calendar year in the Northern Hemisphere, or from July 1 until June 30 in the Southern Hemisphere).
While it does not do so every year, freezing temperatures are seen in Melbourne over some winters. The day least likely to be in the growing season is January 16, with a 65% chance.
Time Spent in Various Temperature Bands and the Growing Season in February in Melbourne
Growing degree days are a measure of yearly heat accumulation used to predict plant and animal development, and defined as the integral of warmth above a base temperature, discarding any excess above a maximum temperature. In this report, we use a base of 50°F and a cap of 86°F.
The average accumulated growing degree days in Melbourne are increasing during February, increasing by 389°F, from 411°F to 800°F, over the course of the month.
Growing Degree Days in February in Melbourne
This section discusses the total daily incident shortwave solar energy reaching the surface of the ground over a wide area, taking full account of seasonal variations in the length of the day, the elevation of the Sun above the horizon, and absorption by clouds and other atmospheric constituents. Shortwave radiation includes visible light and ultraviolet radiation.
The average daily incident shortwave solar energy in Melbourne is gradually increasing during February, rising by 1.0 kWh, from 4.1 kWh to 5.0 kWh, over the course of the month.
Average Daily Incident Shortwave Solar Energy in February in Melbourne
For the purposes of this report, the geographical coordinates of Melbourne are 28.084 deg latitude, -80.608 deg longitude, and 16 ft elevation.
The topography within 2 miles of Melbourne is essentially flat, with a maximum elevation change of 23 feet and an average elevation above sea level of 9 feet. Within 10 miles is also essentially flat (33 feet). Within 50 miles is essentially flat (131 feet).
The area within 2 miles of Melbourne is covered by artificial surfaces (67%) and water (32%), within 10 miles by water (44%) and artificial surfaces (42%), and within 50 miles by water (48%) and herbaceous vegetation (20%).
This report illustrates the typical weather in Melbourne, based on a statistical analysis of historical hourly weather reports and model reconstructions from January 1, 1980 to December 31, 2016.
Temperature and Dew Point
There are 2 weather stations near enough to contribute to our estimation of the temperature and dew point in Melbourne.
For each station, the records are corrected for the elevation difference between that station and Melbourne according to the International Standard Atmosphere , and by the relative change present in the MERRA-2 satellite-era reanalysis between the two locations.
The estimated value at Melbourne is computed as the weighted average of the individual contributions from each station, with weights proportional to the inverse of the distance between Melbourne and a given station.
The stations contributing to this reconstruction are:
To get a sense of how much these sources agree with each other, you can view a comparison of Melbourne and the stations that contribute to our estimates of its temperature history and climate. Please note that each source's contribution is adjusted for elevation and the relative change present in the MERRA-2 data.
All data relating to the Sun's position (e.g., sunrise and sunset) are computed using astronomical formulas from the book, Astronomical Algorithms 2nd Edition , by Jean Meeus.
All other weather data, including cloud cover, precipitation, wind speed and direction, and solar flux, come from NASA's MERRA-2 Modern-Era Retrospective Analysis . This reanalysis combines a variety of wide-area measurements in a state-of-the-art global meteorological model to reconstruct the hourly history of weather throughout the world on a 50-kilometer grid.
Land Use data comes from the Global Land Cover SHARE database , published by the Food and Agriculture Organization of the United Nations.
Elevation data comes from the Shuttle Radar Topography Mission (SRTM) , published by NASA's Jet Propulsion Laboratory.
Names, locations, and time zones of places and some airports come from the GeoNames Geographical Database .
Time zones for airports and weather stations are provided by AskGeo.com .
Maps are © Esri, with data from National Geographic, Esri, DeLorme, NAVTEQ, UNEP-WCMC, USGS, NASA, ESA, METI, NRCAN, GEBCO, NOAA, and iPC.
The information on this site is provided as is, without any assurances as to its accuracy or suitability for any purpose. Weather data is prone to errors, outages, and other defects. We assume no responsibility for any decisions made on the basis of the content presented on this site.
We draw particular cautious attention to our reliance on the MERRA-2 model-based reconstructions for a number of important data series. While having the tremendous advantages of temporal and spatial completeness, these reconstructions: (1) are based on computer models that may have model-based errors, (2) are coarsely sampled on a 50 km grid and are therefore unable to reconstruct the local variations of many microclimates, and (3) have particular difficulty with the weather in some coastal areas, especially small islands.
We further caution that our travel scores are only as good as the data that underpin them, that weather conditions at any given location and time are unpredictable and variable, and that the definition of the scores reflects a particular set of preferences that may not agree with those of any particular reader.
Please review our full terms contained on our Terms of Service page.